-
Our FC75P Mounting Gland are an easy and economical means for mounting pH sensors for in-line applications. Compatible with all 12mm electrodes, including S222CD Light-Duty Online Process pH Sensor. For Flow Tee See FC75c -
The 855 is a shielded, low-noise cable assembly for our S8000 series pH and ORP sensors with Automatic Temperature Compensation (ATC). This ATC cable assembly has 3/4" NPT thread for inline or submersion installations. Click this link for our shielded, low-noise cable assembly without temperature compensation (S853). - The 855 is a shielded, low-noise cable assembly for our S8000 series pH and ORP sensors. This cable assembly has 3/4" NPT thread for inline or submersion installations. Click this link for our shielded, low-noise cable assembly with automatic temperature compensation ATC (S855).
-
Our FC72 flow cell facilitates high-accuracy measurements of free chlorine and chlorine dioxide by preventing air bubble formation on the sensor membrane while maintaining laminar flow across the membrane. Compatible with FCL Series Free Chlorine Sensors and CLD Series Chlorine Dioxide Sensors.- Facilitates high-accuracy measurements
- Simple Sensor Installation
- For use with Sensorex FCL Series Free Chlorine and CLD Series Chlorine Dioxide Sensors
- One year limited warranty
-
Our BV-1 full port 1” ball valve is designed for use with our S675 Series Wet Tap Insertion Assemblies and S656CD pH Sensors. The BV1 mounts a pH sensor in pressurized lines or the sidewall of tanks. Sensors can be retracted for service without shutting down lines or the need to empty tanks. Constructed of durable CPVC.- Remove sensors for cleaning and maintenance without system shutdown
- Full 1" port design is compatible with Sensorex insertion assemblies and sensors
- One year limited warranty
-
Our FM001 Flow Regulator allows for simple flow control, and is recommended for use with the FCL Series Free Chlorine Sensors and CLD Series Chlorine Dioxide Sensors when integrated with the FC72 Flow Cell. Provides precision flow control from 0.1 to 1.0 gpm (0.5 to 4.0 l/min) with 94% accuracy (full-scale range).- Facilitates high-accuracy measurements of free chlorine and/or chlorine dioxide
- Precision flow controlfrom 0.1 to 1.0 gpm
- Simple installation
- One year limited warranty
-
The LPM100 is a durable, loop-powered 4-20mA display for use in process monitoring applications. Monitor various parameters, including UV transmittance, free chlorine, dissolved oxygen, and more. This large display meter can be mounted in various configurations - including pipe mounting with our pipe mount kit. Simple installation and operation make it an ideal solution for process read out monitoring.- Compatible with Sensorex 4-20mA output sensors
- Durable for harsh environmental conditions
- Simple set up and operation
- User-friendly interface
- One year limited warranty
-
Sensor cartridge housing for use with S8000 series pH and ORP electrodes. Available with integrated automatic temperature compensation and solution ground. Reduce operating costs of pH sensors by using the modular S8000 platform - only the sensor cartridge must be replaced. For use in submersion or in-line installations.- Modular design lowers overall pH sensor cost
- Easy installation
- Solution ground available for eliminating measurement errors caused by reference ground potentials
- Compatible with all Sensorex S8000 Series pH and ORP sensor cartridges
- One year limited warranty
-
Now Available with optional MODBUS/RS485 Interface
For S8000 Modular pH, ORP and Contacting Conductivity applications which require more than a direct electrode output, plug-in electronic modules are available. Simply select the parameter type and desired amplifier/output.- Input Voltage Options:
- 12V DC - MODBUS only
- 24V DC - 4-20mA & MODBUS
- Input Voltage Options:
-
pH and ORP measurement loops can be difficult to troubleshoot unless you have the right tools. Our CAL-C110 simulator mimics the signal of a perfect pH or ORP sensor. No need to throw away good sensors when the issue may be the interconnection cables or pH/ORP instrument. The simulator costs less than most pH or ORP sensors. It can easily pay for itself the very first time you consider disposing of a perfectly good sensor. Allows the user to identify the sensor, cable, meter, preamplifier, or controller as the cause of the problem.- An essential tool for troubleshooting pH and ORP systems
- Compatible with most pH and ORP systems using BNC connectors
- Simulate high impedance loads
- Instantly ready for use and includes 9V battery
- One year limited warranty
-
The Calibration Box (PN# CALBOX - MB) is used to calibrate modbus sensors. The wires from the sensors connect to the terminal block on the front of the box. It connects to a computer via a USB interface. This product is to be used with only the integrated version of our Smart Sensors, which include:- S272 pH & ORP sensors
- DO6400 Series sensors
- TCS3020 sensor
- FCL & CLD amperometric sensors
-
The Calibration Adapter (PN# S857) is used to calibrate modbus sensors. It threads on to the back of the smart sensor and it connects to a computer via a USB interface. This product is to be used with only the modular version of our Smart Sensors, which include:- S8000 Series pH and ORP Sensors
- CS8000 Series Conductivity Sensors
-
FREE U.S. SHIPPING ON ORDERS $199+ | 24-Hour Rapid Delivery Available
