Whether you have just purchased a new pool or are getting ready to fill your pool for the first time since winter, you’ll want to follow some basic steps to make sure your pool water is ready to use. Maintaining the right water chemistry is necessary if you want to be comfortable when you go for a swim.
When you’re getting started, there is a long list of different pool chemicals that you can use to obtain the ideal pool water chemistry. With the right balance of chemicals, you shouldn’t notice any stains, corrosion, or scale buildup around the pool surfaces. The following acts as the ultimate guide on the start-up chemicals that should be placed in your pool.
Proper water chemistry is essential if you want to prevent issues like algae growth, cloudy water, and corrosion in a freshly refilled swimming pool. While you can take steps to achieve the right water chemistry after the pool’s been used, it’s best to add the necessary chemicals immediately after the pool has been filled.
To begin this process, test your pool water to determine what chemicals need to be included. Balancing the water chemistry requires the addition of essential chemicals during the pool start-up process. During testing, make sure that you place the sensor in several areas that are at least two to three feet beneath the water’s surface. If there are small variations in your results, average them out to obtain accurate readings.
During pool start-up, there are numerous chemicals that you should add to your pool water, the primary of which include:
The appropriate amount of each chemical that you should add can be calculated based on the current water chemistry levels and the size of your pool.
As touched upon previously, algae growth, cloudy water, and high or low pH levels are the most common issues that can arise during the pool start-up process. Troubleshooting these issues requires proper testing and balancing of the water chemistry. Make sure that you measure the water before and after you add any chemical.
Let’s say that you test your pool water and find that the pH levels are below the ideal range of 6.5-7.5. You can respond by adding a pH increaser to the water. After waiting for around two to four hours, retest the water. If the pH is still too low, add more of the increaser. When pH levels are too high, a pH decreaser should help you reach the optimal reading.
Regular maintenance and testing of your pool water chemistry is crucial to ensure the continued health and safety of any swimmers who enter. By keeping the water clean, balanced, and clear, you’ll be able to protect swimmers from harmful pollutants and contaminants. There’s also less of a chance that mineral buildup or corrosion will occur, which means that you should be able to avoid expensive hardware repairs. Performing maintenance consistently allows you to prevent issues before they occur and should help you extend your pool’s longevity.
Keep in mind that the pool liner walls are constantly coming into contact with the pool water and all of the contaminants that are found within. By maintaining these surfaces and keeping them free of mold, debris, and algae, your pool should remain clean. While the filter in your pool will get rid of dirt and most other contaminants, filter systems can undergo wear and tear over time. This damage can be mitigated with proper maintenance.
The four basic types of pool sanitation systems that you should consider include:
Chlorine systems are the most common solutions around and are designed to solely use chlorine to properly treat and disinfect water. The main advantages of a chlorine system include wide availability and affordable prices. The chemical also works as a residual sanitizer, which means that it continues to disinfect your pool water for days.
However, there are a few drawbacks to keep in mind. For one, there’s a higher risk that swimmers will encounter chlorine-related health problems. The possible side effects of chlorine include allergies, red eyes, lung irritation, and dry skin. Chlorine may also leave an odd pool odor that lingers.
A saltwater sanitation system uses salt treatment in order to clean the water. This treatment acts like chlorine without requiring you to place that substance in your pool water. Compared to a chlorine system, saltwater sanitation systems have lower maintenance requirements. Saltwater is also less harmful to a person’s body. You shouldn’t notice as much damage to swimsuits or towels when using a saltwater system.
The main issue with saltwater pools is that they aren’t chlorine-free. They also need to be handled and stored manually. Even though saltwater isn’t as damaging as chlorine, it’s still corrosive to certain pool surfaces and equipment.
If you’re considering an ozone sanitation system, this is the least used system at your disposal. It uses ozone gas to effectively oxidize any bacteria in the pool water. If you have this system installed in your pool, you won’t need to use as much chlorine. The water will also be softer than it would be when using a chlorinated sanitation system. However, an ozone sanitation system is expensive and is unable to provide you with continuous sanitation. Keep in mind that ozone is considered to be a toxic gas and may accumulate in a pool pump room or under pool covers.
You may also consider using a UV sanitation system, which works by exposing the water to a large bulb that uses UV light to properly suppress bacteria. This form of lighting is also effective at eliminating chlorine-resistant microbes. Many pool owners have a UV system installed to act as a secondary sanitation system. This is a clean type of sanitation that doesn’t require much chemicals.
One downside to UV sanitation is that harmful bacteria cells will remain the water, which may promote the return of these bacteria. Since a UV system doesn’t provide you with continuous sanitation, you’ll need to obtain a residual sanitizer. These systems are also expensive and can be costly to repair.
Properly handling pool chemicals is essential for your safety. It’s highly recommended that you follow manufacturer instructions and safety precautions to prevent injuries and accidents. The exact technique you use to add these chemicals to your pool water depends on the types of chemicals you’re using. Some tips and suggestions that you should keep in mind include:
After you open your pool, you should filter, clean, treat, and circulate the water on a daily basis. Always keep safety in mind when adding chemicals to the pool water. Keep in mind that more filtering is needed during the warm summer months.
If you want to balance the water chemistry in a freshly refilled swimming pool, you’ll need to add the right chemicals during pool start-up. From pH increasers to algaecides, there are numerous chemicals you can place in your pool water depending on what the current water chemistry looks like. If you want to ensure the continued health and safety of anyone who swims in your pool, you’ll need to perform proper maintenance and testing of the pool water chemistry. Make sure that you select the right pool sanitation system as well.
Maintaining a pristine pool or spa isn't just about crystal-clear water and inviting temperatures; it's…
Whether you grow crops for food or improve your yard's appearance, you should understand how…
Water is one of our most precious resources for sustaining life and supporting countless ecosystems.…
As the temperatures rise and the promise of lazy summer afternoons beckons, pool owners eagerly…
Untreated water is filled with contaminants that can cause many health problems if consumed in…
Gold processing, mainly through cyanidation, is a cornerstone of modern mining, facilitating the efficient and…