DO1200 – Galvanic Dissolved Oxygen Sensor

$250.40

DO1200 - Galvanic Dissolved Oxygen Sensor

Parameters & Applications

Product Information

Our DO1200 galvanic dissolved oxygen sensors measure the oxygen content of water using an electrochemical measurement principle. Built in an economical but durable 12mm epoxy body, these sensors are suitable for portable or benchtop use. The DO1200 can also be installed inline for continuous monitoring applications by upgrading to a PTFE membrane cap. The sensor is compatible with our FC75P 3/4 inch in-line fitting for mounting into 3/4 inch FNPT threaded tees.
  • Galvanic (electrochemical) measurement principle
  • Replaceable membrane cap and fill solution
  • 12mm durable epoxy body
  • For benchtop, portable, or inline use
CA ResidentsProp 65 WARNING(S)

Our DO1200 galvanic dissolved oxygen sensors measure the oxygen content of water using an electrochemical measurement principle. Built in an economical but durable 12mm epoxy body, these sensors are suitable for portable or benchtop use. The DO1200 can also be installed inline for continuous monitoring applications by upgrading to a PTFE membrane cap. The sensor is compatible with our FC75P 3/4 inch in-line fitting for mounting into 3/4 inch FNPT threaded tees.

  • Galvanic (electrochemical) measurement principle
  • Replaceable membrane cap and fill solution
  • 12mm durable epoxy body
  • For benchtop, portable, or inline use

Request a Quote

Specifications

  • Range: 0-20mg/L

    Materials: Epoxy and Noryl

    Membrane Materials: HDPE (lab) or PTFE (inline)

    Saturation Output: HDPE = 47mV +/- 9mV, PTFE = 33mV+/-9mV

    Response Time: After Equilibration – HDPE 1 minute for 2mV, PTFE 2 minutes for 2mV

    Temperature: 0-50°C

    Pressure: 0-100 PSIG (0-7.5 bar)

Downloads


Additional information

Weight N/A
Dimensions N/A
Membrane

HDPE, PTFE

Preparing chemical solutions?

Visit our pH calculator first.

Questions?

Thumbs up