$1,711.30 – $1,926.37
ODO8000 and ODO9000 - Lumin-S Optical Dissolved Oxygen Sensors with Digital Communication
Product Information
The Lumin-S optical dissolved oxygen sensor delivers reliable DO measurements over a long operating life. There are no membranes to replace, no electrolyte solutions to replenish, and no anodes to clean. Maintaining the sensor is as easy as replacing the optical sensing cap once every 1-2 years, and since all calibration data is stored on the cap, there’s no need to calibrate. This dissolved oxygen sensor outputs a Modbus/RS-485 digital signal for easy PLC integration.
- Reliable measurements: Optical sensor technology delivers accurate DO monitoring with no drift and no minimum flow
- Long operating life with minimal maintenance: No membranes, electrolyte solutions, or anodes – just replace the cap once every 1-2 years
- No calibration: All calibration data is stored on the cap for quick and easy startup
- Simple system integration: Use Modbus/RS-485 to integrate with a PLC or other control system
- One year limited warranty: We stand behind all our products with the Sensorex Guarantee
CA Residents: Prop 65 WARNING(S)
The Lumin-S optical dissolved oxygen sensor delivers reliable DO measurements over a long operating life. There are no membranes to replace, no electrolyte solutions to replenish, and no anodes to clean. Maintaining the sensor is as easy as replacing the optical sensing cap once every 1-2 years, and since all calibration data is stored on the cap, there’s no need to calibrate. This dissolved oxygen sensor outputs a Modbus/RS-485 digital signal for easy PLC integration.
Available with Stainless Steel or Titanium body
- Reliable measurements: Optical sensor technology delivers accurate DO monitoring with no drift and no minimum flow
- Long operating life with minimal maintenance: No membranes, electrolyte solutions, or anodes – just replace the cap once every 1-2 years
- No calibration: All calibration data is stored on the cap for quick and easy startup
- Simple system integration: Use Modbus/RS-485 to integrate with a PLC or other control system
- One year limited warranty: We stand behind all our products with the Sensorex Guarantee
Specifications
Measurement Range: 0-200%, 0.00-20.00 mg/L, 0.00-20.00 ppm dissolved oxygen
Temperature Range: 0-50⁰C
Body Construction:
ODO8000: Stainless Steel 316L
ODO9000: Titanium
Power Requirement: 12V
Mounting Hardware: optional 1″ NPT for connecting conduit – part number ODOA81 (order separately)
Cable Length: 10 meters (33 feet)
Warranty: One year limited warranty
Additional information
Weight | 1.68 lbs |
---|---|
Dimensions | 10.75 × 4.4 × 3.4 in |
Cable Length | 10 mt (33 ft) |
Complete Your System
ODOA-Series Replacement Cap for Optical Dissolved Oxygen Probes
The ODOA-series replacement caps let you quickly and easility service your Sensorex Lumin-S Optical Dissolved Oxygen probe. While the caps…
Preparing chemical solutions?
Visit our pH calculator first.
Shop NowMore from Sensorex
In addition to the products above we have a full range of water quality sensors and the accessories you need to make reliable measurements.
Have a Question?Get In Touch
If you need help selecting the right sensor for your application drop us a message.