Name: CX20 - Conductivity Controller
Brand: Sensorex
SKU: CX20
Availability: InStock

“Sensorex Smart Sensor User Interface Software” has been added to your cart. View cart

$882.40

CX20 - Conductivity Controller

The CX20 conductivity controller is a convenient and cost effective solution for monitoring and maintaining conductivity. Save space in your panel with the small footprint 1/8 DIN case. Use the two sets of relay outputs to program process control, including management of alarms and chemical dosage systems.

Easy to install 1/8 DIN Case
Two sets of programmable relays for conductivity or resistivity
Clear LCD displays conductivity, resistivity, or temperature
100-240 VAC power supply

Note: Controller is only compatible with sensors that have spade lug or tinned lead connectors and 10k NTC temperature compensation.

Easy to install 1/8 DIN Case
Two sets of programmable relays for conductivity or resistivity
Clear LCD displays conductivity, resistivity, or temperature
100-240 VAC power supply

Note: Controller is only compatible with sensors that have spade lug or tinned lead connectors and 10k NTC temperature compensation.

SKU: CX20 Categories: Conductivity, Controllers & Transmitters

The CX20 conductivity / EC controller is a convenient and cost effective solution for monitoring and maintaining conductivity. Save space in your panel with the small footprint 1/8 DIN case. Use the two sets of relay outputs to program process control, including management of alarms and chemical dosage systems.

Easy to install 1/8 DIN Case
Two sets of programmable relays for conductivity or resistivity
Clear LCD displays conductivity, resistivity, or temperature
100-240 VAC power supply

Note: This conductivity controller is only compatible with sensors that have spade lug or tinned lead connectors and 10k NTC temperature compensation.

Looking for an EC (electrical conductivity) transmitter? Try our CX10 Conductivity Transmitter with 4-20mA output. Need an EC controller that’s also a 4-20mA transmitter? Check out the CX2000 Conductivity Controller.

CA Residents: Prop 65 WARNING(S)

Cell Constant: 0.01, 0.1, 1.0 (2 electrode)

Reference Temperature: 25°C, factory set

Temperature Coefficient: 2.00 or 0.00%, user selectable

Temperature Sensor: Thermistor: 10k ohm at 25°C

Operating Temperature: -10°C to 120°C (+/- 0.3°C, 0.1°C resolution)

Relays: 5A at 115VAC or 2.5A at 220VAC (resistive only)

Maximum Load: 500 ohm

Output Accuracy: +/- 0.03mA

Isolation Voltage: 500VDC

Keys: Audio feedback for all keys

Power: 100VAC to 240VAC, 50/60Hz

Ambient Temperature Range: 0.0°C to 50.0°C

Enclosure: 1/8 DIN (3.78″ L x 3.54″ W x 1.89″ H)