$823.10
CX100 - Conductivity Transmitter, Loop Powered 4-20mA
Product Information
The CX100 is discontinued and no longer available. Information below is for reference and support materials are available in the download section.
Our CX105 Conductivity Transmitter is the best replacement option.
See our complete selection of Conductivity transmitters here.
The CX100 is a loop powered conductivity transmitter for use with contacting conductivity sensors. The 4-20mA output is ideal for connecting to a PLC for advanced control systems. Easily power the unit with available two-wire power supply loop. Versatile mounting options for wall or panel mount.
- Flexible configurations: Six selectable conductivity ranges
- Facilitates easy sensor maintenance: Output ‘HOLD’ for calibration & setup to avoid process disruption
- Accurate conductivity / TDS measurements: Integrated Automatic Temperature Compensation (ATC)
- Compatible with a wide variety of sensors: For use with all Sensorex contacting conductivity sensors
- One year limited warranty: We stand behind all our products with the Sensorex Guarantee
Note: Transmitter is only compatible with sensors with tinned leads and Pt100 RTD temperature compensation.
Not sure if this conductivity transmitter is what you need? Compare the CX100 Conductivity Transmitter to the rest of our conductivity transmitters and controllers with our handy comparison chart.
CA Residents: Prop 65 WARNING(S)
Our CX100 is an isolated output 4-20mA industrial transmitter for reading contacting conductivity sensors. Easily power the unit with available two-wire power supply loop. Ideal for connecting to a PLC for advanced control systems. Versatile mounting options for wall or panel mount.
- Facilitates easy sensor maintenance with output ‘HOLD’ function
- Accurate conductivity / TDS measurements
- Flexible configurations with 6 selectable conductivity ranges
- Compatible with a wide variety of contacting conductivity sensors
- One year limited warranty
Note: Transmitter is only compatible with sensors with tinned leads and Pt100 RTD temperature compensation.
Consider our new CX105 as a great alternative to the CX100.
Out of stock
Specifications
Measurement Range: (R1) 0-19.99 uS/cm, 0.01 uS/cm resolution; (R2) 0-199.9 uS/cm, 0.1 uS/cm resolution; (R3) 0-1999 uS/cm, 1 uS/cm resolution; (R4) 0-10.00 mS/cm, 0.01 mS/cm resolution; (R5) 0-19.99 mS/cm, 0.01 mS/cm resolution; (R6) 0-199.9 mS/cm, 0.1 mS/cm resolution
Cell Constants: k=0.1 (R1-R5), k=1.0 (R1-R6), k=10 (R2-R6)
Measurement Accuracy: +/- 1% full scale range
Temperature Range: 0 °C to 100 °C , 0.1° C resolution, +/- 0.5 °C accuracy
Calibration Mode: Automatic with built-in standard solutions manual cell constant adjustment
Output: Isolated DC 4-20mA
Enclosure: NEMA 4X IP65, with push-button control pad. HWD: 96 mm (3.77″) x 96 mm (3.77″) x 66mm (5.20″), 1/4 DIN
Mounting Options: Panel or Wall mount
Ambient Operating Temperature: 0° C to 50° C
Display: Dual display custom LCD
Temperature Compensation: Pt100 RTD with automatic compensation or manually configured
Power Requirement: 12-24V DC, maximum 600Ω load
Certifications: CE
Warranty: One year limited warranty
Additional information
Weight | 1.44 lbs |
---|---|
Dimensions | 9.5 × 6.5 × 3.5 in |
Preparing chemical solutions?
Visit our pH calculator first.
Shop NowMore from Sensorex
In addition to the products above we have a full range of water quality sensors and the accessories you need to make reliable measurements.
Have a Question?Get In Touch
If you need help selecting the right sensor for your application drop us a message.