PRODUCT INFORMATION GUIDES
Product Information Guides for specifications, care & use, and installation are listed below by document and product type. If you can’t find what you’re looking for, please Contact Us.
PRODUCT SPECIFICATIONS
Smart pH & ORP Sensors
- S8000 Series pH & ORP Sensors with Digital Communication
- S272 pH & ORP Sensors with Digital Communication
Smart Dissolved Oxygen Sensors
- ODO (Optical Dissolved Oxygen) Sensors with Digital Communication
- D6400 Series Dissolved Oxygen Sensors with Digital Communication
Smart Toroidal Conductivity Sensors
Smart Contacting Conductivity Sensors
Laboratory & Light Industrial Contacting Conductivity Sensors
- Sensorex CS150 12 mm Graphite Contacting Conductivity Sensor – Product Specification Sheet
- Sensorex CS200 12 mm Platinum Contacting Conductivity Sensor – Product Specification Sheet
- Sensorex CS300 Process Graphite Contacting Conductivity Sensor – Product Specification Sheet
General Purpose Contacting Conductivity Sensors
- Sensorex CS650 Stainless Steel Contacting Conductivity Sensor – Product Specification Sheet
- Sensorex CS665 12 mm Steam Sterilizable Contacting Conductivity Sensor – Product Specification Sheet
- Sensorex CS700 High Performance Stainless Steel Contacting Conductivity Sensor – Product Specification Sheet
Heavy Industrial Conductivity Sensors
Toroidal Conductivity Sensors
General Purpose Conductivity Sensors
- Sensorex TCS3020 General Purpose Noryl Toroidal Conductivity Sensor
- Sensorex ITCS3020 Smart General Purpose Noryl Toroidal Conductivity Sensor
Conductivity Accessories
Conductivity Transmitters
- CT1000 Conductivity Transmitter
- CX10 Conductivity 4-20mA Transmitter
- CX20 Conductivity Controller
- CX100 Conductivity 4-20mA Transmitter
- CX105 Conductivity 4-20mA Transmitter
- CX2000 Conductivity 4-20mA Transmitter
- CX3100 Conductivity 4-20mA Transmitter
- TCSMA Blind Toroidal Conductivity Transmitter
- TCSTX Display Toroidal Conductivity Transmitter
- EX2000RS Toroidal Conductivity 4-20mA and Modbus Transmitter/Controller
Benchtop Conductivity Meters
- SD7000 Specifications
- SD7420 Specifications
- SD7500 Specifications
- S8000 Specifications
- S600 Series Submersion
- S600 Series In-line
- S600 Series Insertion/Wet-tap
- S600 Series Side Stream
- DA600 Series Ground Loop Interrupt
- S260/S270 Series General Purpose pH Sensors
- S272 Series Online Process pH Sensors
- S465 Series Sensors
- S420 Series Sensors
- SD7000 Specifications
- S8000
- S600 Series Submersion
- S600 Series In-line
- S600 Series Insertion/Wet-tap
- S600 Series Side stream
- DA600 Series Ground Loop Interrupt
- General Purpose ORP Specifications
- S260/S270 Series General Purpose ORP Sensors
- S272 Series Online Process ORP Sensors
- S465 Series Sensors
- S420 Series Sensors
Portable DO Sensors
Aquaculture/Wastewater DO Sensors
DO Transmitters
PRODUCT USE & CARE INSTRUCTIONS
- Plastic body combination pH (part number starts with “S”, pH1000, pH2000, pH2100, pH2200, pH5000, pH6000)
- Sealed reference half-cell (part number starts with “S” or “SG”
and ends with “R” or “RD”) - Refillable reference half-cell (part number starts with “S” or “SG”
and ends with “1R” or “1RD”) - Glass body combination pH (part number starts with “SG”and ends with “C”,”CD”, or pH1400, pH2400, pH2500)
- Calomel-Free Refillable pH (part number ends with “CIT”)
- Calomel-Free Sealed Reference half-cell (part number ends with “0-RIT”)
- Calomel-Free Refillable Reference Half-Cell (part number ends with “1-RIT”)
- pH Detector/Flow Through Cell (FC45C, FC47C, FC49K, FC51K,
970282) - pHASE Epoxy Body Sealed (S1010CD, S1030CD)
- pHASE Glass Body Sealed (SG1050CD)
- pHASE Refillable / Rapid-Renew Plastic Body (S1021CD or pH3000)
- pHASE Refillable / Rapid-Renew Glass Body (SG1041CD or pH3400)
- 3-in-1 pH/Reference/ATC electrodes (S290C, S291C, S292C, S294C,
S296C, S298C)
Popular pH Sensor Instructions
- SD7000 Series Differential pH/ORP Sensors
- S8000 Modular pH System (S8000 Series) (S8000 electrodes, EA adapters, EM electronic modules,FC800 flow cell, and FC801 adapter)
- Low Cost Epoxy Body pH in 1/2″ or 3/4″ Hex Nipple (S260, S261, S262, S263, S265, S267, S268, S269)
- Epoxy Body pH Cartridge Type (S222C, S222CD)
Flat-Surface, Self-Cleaning (Note: all these electrodes require cable assembly & mounting hardware)
- Submersion (DA650CD,S650CD, S651CD)
- By-pass (S645CD)
- In-line (3/4″, 1″, 2″) (DA660CD, DA661CD, DA662CD, S660CD, S661CD, S662CD)
- Insertion/Wet-Tap (S655CD, S656CD)
Cable Assemblies and Mounting Hardware
- Submersible without temperature compensation (S653)
- Submersible with temperature compensation (S653TC)
- In-line with temperature compensation for model S222C/CD (FC75TC)
- In-line without temperature compensation (FC66P, FC67P, FC68P)
- In-line with temperature compensation (FC66TC, FC67TC, FC68TC)
- By-pass CPVC without temperature compensation (FC60C)
- By-pass CPVC with temperature compensation (FC60TC)
- By-pass PVDF without temperature compensation (FC60K)
- By-pass PVDF with temperature compensation (FC60TK)
- Insertion assembly without temperature compensation (S675, S676, S677, S675K)
- Insertion assembly with temperature compensation (S675TC, S676TC, S677TC, S675TK)
Laboratory & Light Industrial Contacting Conductivity Sensors
- Sensorex CS150 Product Manual
- Sensorex CS200 Product Manual
- Sensorex CS300 Product Manual (formerly named CS8000 series)
General Purpose Contacting Conductivity Sensors
Heavy Industrial Contacting Conductivity Sensors
Toroidal Conductivity Sensor
- Battery-Powered preamplifier (PHAMP-1)
- Preamplifier Wiring Diagrams
- pH/ORP Simulator (C110)
- PHMA Blind pH transmitter (PHMA)
- External Ground Loop Interrupt Box (GLE-1)
- TX10 pH/mV 4-20mA transmitter
- TX20 pH/mV Limit Controller
- TX100 pH/mV transmitter (TX100)
- TX105 pH/mV transmitter (TX105)
- TX3000 pH/mV transmitter (TX3000)
- TX3100 pH/mV transmitter (TX3100)
- TX2000 pH/mV transmitter (TX2000)
- TX2000RS pH/mV transmitter RS485 (TX2000RS)
- Plastic body combination ORP (S500C-ORP, S500CD-ORP, 970884, ORP1000, ORP2000, ORP3000)
- Glass body combination ORP (SG500C-ORP, SG500CD-ORP)
Popular ORP Sensor Instructions
- S8000 Modular ORP System S8000 Series (S8000 electrodes, EA adapters, EM electronic modules,FC800 flow cell, and FC801 adapter)
- Epoxy body ORP in 1/2″ or 3/4″ Hex Nipple (S260C-ORP, S260CD-ORP, S261C-ORP, S261CD-ORP, S262C-ORP, S262CD-ORP, S263C-ORP, S263CD-ORP)
- Epoxy body ORP cartridge type (S222C-ORP, S222CD-ORP)
Flat-Surface, Self-Cleaning (Note: All electrodes in this category require cable assembly and mounting hardware)
- Submersion (DA650CD-ORP,S650CD-ORP, S651CD-ORP)
- By-pass (S645CD-ORP)
- In-line (3/4″, 1″, 2″) (DA660CD-ORP, DA661CD-ORP, DA662CD-ORP, S660CD-ORP, S661CD-ORP, S662CD-ORP)
- Insertion/Wet-tap (S655CD-ORP, S656CD-ORP)
Cable Assemblies and Mounting Hardware
- Submersible without temperature compensation (S653)
- In-line without temperature compensation (FC66P, FC67P, FC68P)
- By-pass CPVC without temperature compensation (FC60C)
- By-pass PVDF without temperature compensation (FC60K)
- Insertion assembly without temperature compensation (S675, S676, S677, S675K)
- Lumin-S Optical DO Sensor
- DO1200 Laboratory / Portable Dissolved Oxygen Sensor
- DO6400 Series Stationary Dissolved Oxygen Sensors (mV output or built in 4-20mA transmitter) – after September 1, 2008
- DO7400 Series (mV output or built in 4-20mA transmitter) – after November 1, 2009